Get historical equipment stats

get

https://api.samsara.com/fleet/equipment/stats/history

Returns historical equipment status during the given time range. This can be optionally filtered by tags or specific equipment IDs.

Rate limit: 150 requests/sec (learn more about rate limits here).

Submit Feedback: Likes, dislikes, and API feature requests should be filed as feedback in our API feedback form. If you encountered an issue or noticed inaccuracies in the API documentation, please submit a case to our support team.

To use this endpoint, select Read Equipment Statistics under the Equipment category when creating or editing an API token. Learn More.

Recent Requests

Time	Status	User Agent
Retrieving recent requests…

Loading…

Query Params

after

string

If specified, this should be the endCursor value from the previous page of results. When present, this request will return the next page of results that occur immediately after the previous page of results.

startTime

string

required

A start time in RFC 3339 format. Millisecond precision and timezones are supported. (Examples: 2019-06-13T19:08:25Z, 2019-06-13T19:08:25.455Z, OR 2015-09-15T14:00:12-04:00).

endTime

string

required

An end time in RFC 3339 format. Millisecond precision and timezones are supported. (Examples: 2019-06-13T19:08:25Z, 2019-06-13T19:08:25.455Z, OR 2015-09-15T14:00:12-04:00).

parentTagIds

array of strings

A filter on the data based on this comma-separated list of parent tag IDs, for use by orgs with tag hierarchies. Specifying a parent tag will implicitly include all descendent tags of the parent tag. Example: parentTagIds=345,678

parentTagIds

tagIds

array of strings

A filter on the data based on this comma-separated list of tag IDs. Example: tagIds=1234,5678

tagIds

equipmentIds

array of strings

A filter on the data based on this comma-separated list of equipment IDs. Example: equipmentIds=1234,5678

equipmentIds

types

array of strings

required

The types of equipment stats you want to query. Currently, you may submit up to 4 types.

engineRpm: The revolutions per minute of the engine.
fuelPercents: The percent of fuel in the unit of equipment.
obdEngineSeconds: The number of seconds the engine has been running as reported directly from on-board diagnostics. This is supported with the following hardware configurations: AG24/AG26 + AOPEN/A9PIN/ACT9/ACT14.
gatewayEngineSeconds: An approximation of the number of seconds the engine has been running since it was new, based on the amount of time the asset gateway has been receiving power with an offset provided manually through the Samsara cloud dashboard. This is supported with the following hardware configurations:
- AG24/AG26/AG46P + APWR cable (Auxiliary engine configuration required)
- AG52 + BPWR/BEQP cable (Auxiliary engine configuration required).
gatewayJ1939EngineSeconds: An approximation of the number of seconds the engine has been running since it was new, based on the amount of time the AG26 device is receiving power via J1939/CAT cable and an offset provided manually through the Samsara cloud dashboard.
obdEngineStates: The state of the engine read from on-board diagnostics. Can be Off, On, or Idle.
gatewayEngineStates: An approximation of engine state based on readings the AG26 receives from the aux/digio cable. Can be Off or On.
gpsOdometerMeters: An approximation of odometer reading based on GPS calculations since the AG26 was activated, and a manual odometer offset provided in the Samsara cloud dashboard. Valid values: Off, On.
gps: GPS data including lat/long, heading, speed, address book entry (if exists), and a reverse geocoded address.
engineTotalIdleTimeMinutes: Total time in minutes that the engine has been idling.

types*

Responses

200Historical equipment stats and pagination information

defaultError response